PIC-USB-4550

PROTOTYPE BOARD FOR PIC18F4550 MICROCONTROLLER WITH USB

This is a handy prototype board for developing USB applications with a PIC18F4550 microcontroller. What's great all about it is that if you want to only load code into it, i.e. to program it, you can do this without any additional programmer. Microchip provides these free USB solutions for their microcontrollers which are available for you to use off the shelf: USB HID Class firmware you can build a mouse or other Himan Interface Device for Windows, USB CDC Communication class device, USB Mass Storage firmware - add your own USB disk drives to your computer, USB-to-RS232 driver. The plenty of prototype space allows you easy to add on sensors, relays and other peripheral devices to interface to USB. The board can take power from USB or from External supply with small jumper selection. RESET button, User button and LED are on-board.

FEATURES

• ICSP/ICD connector for programming with PIC-MCP, PIC-MCP-USB, PIC-PG1,PIC-PG2, PIC-PG3 or PIC-PG4 and programming and debugging with PIC-ICD2, PIC-ICD2-POCKET, PIC-ICD2-TINY
• USB 2.0 type B connector allow board to be interfaced to PC host.
• PIC18F4550-I/P on DIL40 socket
• Quartz crystal 20Mhz
• LED connected to RD3 through jumper
• User Button connected to RB4
• Reset button
• Power plug-in jack with diode bridge can be powered with AC or DC power supply
• 5V voltage regulator
• Extension slot on every uC pin
• Gird 100 mils
• GND bus
• Vcc bus
• Four mounting holes 3,3 mm (0,13")
• FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• Dimensions 100x80 mm (3,9x3,15")

NOTICE

• Evaluation Board/Kit Important Notice